Panic Hardware Stock List: 2 Bar Lengths, 10 Lines to Hold
Stock 800 and 1000 mm bars first: an 800 mm bar fits a 900 mm leaf and still meets Europe's 60% minimum up to 1330 mm. Hold rim bars 306-S and 315, alarm bar 314, pair device 306-D, keyed trim, cylinders and coordinators, and order specialty bars per project.
The set to order
| Part | What to check | Models |
|---|---|---|
| 1. Rim bar, 1000 mm | 306-S can be cut to door width and is listed for doors up to 1300 mm wide, 85 mm projection. 308-S is adjustable, 93 mm projection. Both are reversible. | 306-S, 308-S |
| 2. Touch bar, 800 and 1000 mm | Hold both lengths. It has hex key dogging, so sell it for doors that are not fire doors. | 315 |
| 3. Alarm bar, 650, 800 and 1000 mm | The only bar with a built-in alarm, and the only one listed at 650 mm for narrow leaves. | 314 |
| 4. Pair device, top and bottom latching | 306-D: 1200 mm bar, doors up to 1300 × 2500 mm. 308-D: 1000 mm bar, 2400 mm high with rods. 316-D lists no bar length. Confirm per-leaf quantity. | 306-D, 308-D, 316-D |
| 5. Mortise device and lock case | 307 is 1000 mm and runs on lock case 72: 65 mm backset, 72 mm center distance. The cylinder length follows the door thickness. | 307, 72 |
| 6. Keyed outside trim | 027, 028 and 037 take 35 to 55 mm doors. 039 takes 45 to 50 mm with its cylinder included. | 027, 028, 037, 039 |
| 7. Passage trim and pull plate | 307 PS is a non-locking outside knob, for 35 to 55 mm doors. 001 is a fixed pull plate, 300 × 75 mm. | 001 |
| 8. Cylinders | X2 is a brass rim cylinder with 3 keys, for doors up to 90 mm. 70 SNDK is a 70 mm profile cylinder with 3 or 5 keys. | X2, 70 SNDK |
| 9. Coordinators | For rebated pairs. DC02: 397 × 120 mm, top of frame. DSL02: 304 stainless steel, adjustable closing force. | DC02, DSL02 |
| 10. Door closers | JU-088: 950 mm, 40 to 65 kg. JU-072: 1050 mm, 40 to 65 kg. JU-093: 1050 mm, 45 to 85 kg. None lists a hold-open. | JU-088, JU-072, JU-093 |
Which lengths reach the most door widths
Two limits set the range of any bar. It cannot be longer than the leaf it sits on, and it cannot be shorter than the minimum for that leaf: half the leaf width in the US, 60% in Europe. The table works out the wide end from those rules. These are sums, not sales figures, and any listed door limit comes first.
An 800 mm bar fits a 900 mm leaf and a 914 mm (36 in) US door, and clears both minimums up to 1330 mm. A 1000 mm bar takes over from about 1100 mm and sits at 77% of a 1300 mm leaf. That is why those two lengths come first. EN 1125 instructions advise the longest effective length, so offer the longer bar where it fits.
| Listed length | Models | Widest leaf at 60% | Widest leaf at 50% |
|---|---|---|---|
| 650 mm | 314 | 1080 mm | 1300 mm |
| 800 mm | 314, 315 | 1330 mm | 1600 mm |
| 900 mm | 300, 303, 310 | 1500 mm | 1800 mm |
| 1000 mm | 301-B, 306-S, 307, 308-S, 314, 315 | 1660 mm | 2000 mm |
| 1040 mm | 302, 304, 305 | 1730 mm | 2080 mm |
| 1050 mm | 303-H, 303-J | 1750 mm | 2100 mm |
Fixed length or cut to width
How the length is set decides how many lines you carry. A bar you can cut serves a run of door widths from one shelf position. A set length has to be held in each size.
| How the length is set | Models | What it means for stock |
|---|---|---|
| Cut to door width | 306-S | One line, up to the listed 1300 mm door |
| Listed as adjustable | 300, 301-B, 302, 303, 304, 305, 307, 308-S, 310 | One line. Ask how it is shortened before you quote |
| Set lengths, customizable | 314 | Hold by length. Custom is per order |
| Set lengths | 315 | Hold by length |
| Made to request | 320, 330 | Order per project |
| No length listed | 309-S, 316-S, 316-D | Ask us before you plan shelf space |
Carry fewer lines: handing and color
- Listed as reversible for left or right hand: 301, 301-B, 302, 304, 306-S, 306-D, 307, 308-S, 313, 316-S and 316-D.
- Listed as non-handed: 320 and 330.
- A reversible bar is one line where a handed bar would be two.
- Trim is a separate check. 016 is listed as reversible, so ask us about any other trim.
- Red or black: 300, 310, 320 and 330.
- Silver or black: 301.
- Silver or a custom color: 314.
- A buyer who orders black wants every part on the door in black, so match your trim stock to your bar color.
Trims to hold alongside
Door thickness decides which trim you can sell. A 44 mm (1-3/4 in) door takes the 35 to 55 mm trims but falls just outside 039. 027 is the one trim with a listed carton count, 20 pieces. 316-S and 316-D list the outside lever as optional, so quote it as its own line. Tell us the bar and we confirm the trim that pairs with it.
| Need | Models | Door thickness |
|---|---|---|
| Keyed lever | 027, 028 | 35 to 55 mm |
| Keyed knob | 037 | 35 to 55 mm |
| Keyed lever, cylinder included | 039 | 45 to 50 mm |
| Keyed lever, black, reversible | 016 | Confirmed against your drawing |
| Knob with no lock | 307 PS | 35 to 55 mm |
| Fixed pull plate | 001 | Confirmed against your drawing |
Spare parts: what the service calls ask for
These are the usual faults on a panic door, with the line that answers each one. Holding them lets you close a call without waiting for a new device.
We do not list strikes, rods, end caps, bar tubes or screw packs as separate models. Name the device and the part on your order and we confirm whether it can ship with it. For model 314, ask us about its alarm parts too.
| Service call | Usual cause | Line to hold |
|---|---|---|
| Keys lost, or staff have changed | Cylinder must be replaced | X2, 70 SNDK |
| Door does not latch | Closer too weak, or a dropped door | JU-088, JU-072, JU-093 |
| Outside lever turns, door stays shut | Wrong spindle length, or a worn trim | 027, 028 |
| Inactive leaf will not close | Coordinator missing or out of adjustment | DC02, DSL02 |
| Mortise device no longer latches | Lock case worn or misaligned | 72 |
Order these per project
Each of these is set by one door, so it does not belong on a general shelf.
- 317 cold room bar: door thickness and bar length are confirmed against the door drawing.
- 306 PS passage bar: it has no latch bolt and needs a separate lock case.
- 320 and 330: their length is set by the customer's request.
- 313: center distance is a choice of 72 or 92 mm, so it follows the door.
Match the range to your market
| Your buyers fit | What we list for them |
|---|---|
| Surface rim bars on 44 mm (1-3/4 in) doors | 314, 315, 027, 028, X2 |
| Traditional European bars on a square spindle | 320, 330, with an 8 × 8 mm or 9 × 9 mm spindle |
| Mortise bars with a profile cylinder | 307, 72, 70 SNDK |
| South American projects | 9080E, a 304 stainless steel lever for lock cases and profile cylinders |
What to send for a stock quotation
- The countries you sell to.
- Your common door widths and thicknesses.
- Door materials: steel, aluminum or wood.
- Bar models and lengths, with a quantity for each.
- Color, and whether trims must match.
- Any own-brand packing.
- Spare parts you want named on the order.
Questions buyers ask
Which panic bar length should a distributor stock first?
Start with 800 and 1000 mm. The 800 mm bar fits a 900 mm leaf and clears the US and European minimums up to 1330 mm. The 1000 mm bar serves wider leaves, up to the 1300 mm listed for 306-S. Check both against your own door sizes.
Do I need separate stock for left-hand and right-hand doors?
Not for reversible bars. 306-S, 306-D, 308-S, 316-S and 316-D are among the models listed for left or right hand. Check trim separately, because 016 is the trim listed as reversible.
Do you sell strikes and rods as spare parts?
We do not list them as separate models. Name the device and the part on your order, and we confirm whether it can ship with it.
Which door widths does the 306-S cover?
It has a 1000 mm bar that can be cut to door width, and it is listed for doors up to 1300 mm wide. How short it can be cut is confirmed against your drawing.
Can you supply panic hardware under our own brand?
OEM and ODM are listed as available on models such as 314, 316-S and 316-D. Send the models, quantities and artwork, and we confirm each line.
Should I sell these for fire doors?
Only against the door's own certificate. Stahlock products carry no published fire certification. Keep dogging bars such as 315 and hold-open closers off fire doors.