Hotel Door Hardware List: Entrance, Connecting, Bathroom
A hotel guest room needs three door lists. Entrance door: closer, viewer, door guard, stop and three hinges. Connecting door: a lock on each leaf, hinges and stops. Bathroom door: privacy lever, hinges and stop. The electronic entrance lock is not in this catalogue, which lists mechanical parts only.
The set to order
| Part | What to check | Models |
|---|---|---|
| Entrance: door closer, standard arm | Match door width and weight to the listing. | JU-061, JU-073, JU-072 |
| Entrance: door closer, track arm | JU-074 and JU-075 list separate closing and latching speed adjustment. JU-088 and JU-093 are chosen by door width and weight. | JU-074, JU-075, JU-088, JU-093 |
| Entrance: door viewer | DV05 lists 12mm, 14mm or 16mm barrels. DV05 BL lists a 200 degree view and a rotating privacy cover. | DV05, DV05 BL |
| Entrance: door guard | Swing bar guard in zinc alloy. State the finish code. | F001, F002 |
| All doors: door stop | DS05 is a floor stop, 44mm diameter. DS01 and DS022 are wall stops, and DS01 projects 96mm. | DS05, DS01, DS022 |
| All doors: hinges | Three per leaf up to 2286mm door height. BL028 is the black 4 x 3 in x 2.5mm option. | SSH016, BL028 |
| Connecting door: lock | One per leaf. Communication function, 35mm to 45mm doors, knob operated. | 5807 SSCL |
| Connecting door: mortise set | Mortise option for interior wooden doors. Backset 45mm, center distance 58mm. | 9088 SS |
| Bathroom door: privacy lever lock | Turn button inside. Check door thickness against the listing. | LH853 SNBK, LH852 BNBK, 8806 SSBK |
| Bathroom door: robe hook | Fix with screws, not adhesive, on a door that swings. 48mm diameter. | BH10 |
Count per room
Multiply this table by the room schedule and you have the first draft of the order. The hinge count assumes a door up to 2286mm (90 in) high. Common trade practice is one hinge for each 762mm (30 in) of door height.
| Part | Entrance door | Connecting door, per leaf | Bathroom door |
|---|---|---|---|
| Lock | Bought separately, see below | 1 communication lock | 1 privacy lever lock |
| Closer | 1 | Only if your code requires it | None in most layouts |
| Viewer | 1 | None | None |
| Door guard | 1 | None | None |
| Stop | 1 | 1 | 1 |
| Hinges | 3 | 3 | 3 |
| Robe hook | None | None | 1 |
Entrance door
Electronic locks are not in this catalogue, so buy the entrance lock separately. Fix that choice first with your lock system vendor, because it sets the door preparation. Everything else on this door is mechanical and on the list below: the closer, viewer, door guard, stop and hinges.
- Closer: choose by door width and door weight from the table below.
- Closer position: on a door that opens into the room, a surface closer body sits on the room side.
- Viewer: order by door thickness, 35mm to 55mm or 60mm to 100mm on DV05.
- Door guard: F001 and F002 are swing bar guards, 110mm and 103mm long.
- Door guard fixing: both parts go on the room side of the door and frame.
- Stop: use a wall stop where the wall is close, and a floor stop where it is not.
- Hinges: SSH016 lists 4 x 4 in x 2.5mm and 4 x 3 in x 2.5mm among its sizes.
Choose the closer from the door
| Model | Door width | Door weight | Arm |
|---|---|---|---|
| JU-061 | 850mm | 25 to 45 kg | Standard arm |
| JU-073 | 850mm | 40 to 65 kg | Standard arm |
| JU-088 | 950mm | 40 to 65 kg | Track arm in the photographs |
| JU-072 | 1050mm | 40 to 65 kg | Standard arm |
| JU-093 | 1050mm | 45 to 85 kg | Track arm in the photographs, mounting confirmed against your drawing |
| JU-074 | Confirmed against your drawing | Confirmed against your drawing | Sliding track arm, 125 degree maximum opening |
Connecting door
A connecting opening between two rooms usually has two leaves, one for each room, so count every line twice. Each guest should be able to secure their own side without help from the other room. The 5807 SSCL is listed with a communication function, a deadlocking latch and operation by key or rotating knob, for 35mm to 45mm doors. Where the project uses mortise locks on interior wooden doors, 9088 SS is the complete set: lever plates, lock body, euro cylinder with a thumbturn inside, spindle and strike plate. Set the thumbturn to the side of the room that owns the leaf.
Bathroom door
The bathroom door needs privacy, not security. Order a lever lock with a turn button inside. If you need an outside emergency release, ask for it on the order and check it on a sample, because we do not list one.
- LH853 SNBK: 60mm backset, 35mm to 45mm doors, satin nickel.
- LH852 BNBK: 60mm or 70mm backset, 35mm to 45mm doors, black nickel.
- 8806 SSBK: 60mm or 70mm backset, 35mm to 55mm doors.
Rated doors change the order
Many building codes treat a guest-room door on a corridor, and often a connecting door, as a fire-rated, self-closing assembly. No fire rating is listed for these products. Before you drill a viewer hole or fix a guard to a rated door, check what the door maker's certificate allows, and have your local authority confirm the hardware. Do not use the hold-open setting of a closer on a door that must self-close.
Questions buyers ask
Does Stahlock supply hotel key card locks?
No. Electronic locks are not in this catalogue. Order the lock from your system vendor, then order the closer, viewer, door guard, stop and hinges for that door from this list.
How many hinges does a hotel room door need?
Common trade practice is one hinge for each 762mm (30 in) of door height. That means three on a door up to 2286mm (90 in) high. Rated doors follow the door maker's certificate.
Which closer should I order for a guest-room door?
Start from the door schedule. Take the door width and weight, then pick the model that covers both. A 900mm wide door at 50 kg points to JU-088, which lists 950mm and 40 to 65 kg.
Swing bar guard or chain for a hotel?
Order F001 or F002 for a swing bar. Order F004 for a chain, or F005 for a chain with a bolt. Choose one type per project, so housekeeping and maintenance deal with a single part.
Can I order all the hardware in one finish?
State one finish code on every line, then compare it against each model, because finish lists differ by model. A part that cannot match should be flagged before the order, not found on site.